Thermal Spray Products
	Thermal Spray Products - Ceramics - Carbides - Self Fluxing Products - Blends - Pure Metals - Alloys - Abradables CERAMICS SEACO Chrome Oxide Metco 1060F Chrome Oxide 170/15µ 325/15µ 106,106F 1360CP Chrome Oxide/Silica 140/15µ 136CP 1360F Chrome Oxide/SIlica 270/15µ 136F Applications: Dense, corrosion resistant, abrasion resistant, particle erosion and cavitation resistant below 1000°F, insoluble in acids, alkalis, and alcohol SEACO Titanium Oxide Metco 1020 99% Titanium Dioxide 270/11µ 102 Applications: Moderate abrasion resistance, soluble in alkalis and H2SO4, but resists many other environments, Lower hardness than TiO2 & Al2O3, slightly conductive, static electricity does not build on coating surface SEACO Zirconium Oxide Metco 2020 80% Zirconia, 20% Yttria (Spray Dried) 202NS 2030 92% Zirconia, 8% Yttria (Spray Dried) 203NS 2040 (B) 92% Zirconia, 8% Stabilized Yttria 204 (B) 2100 Zirconia, 24% Magnesia 210 Applications: Thermal barriers, thermal shock resistance, stable at temperatures from 1550-2460°F, Rocket & Jet engines, Turbine combusters, Airfoils, Diesel engine pistons, valves, cylinder heads SEACO Aluminum Oxide Metco 1010SF Grey Alumina, 2.5% Titania Dioxide 22/5µ 101SF 1010 Grey Alumina, 2.5% Titania Dioxide 325/5µ 101NS 1010B Grey Alumina, 2.5% Titania Dioxide 200/30µ 101B-NS 1300 Alumina, 13% Titania 270/15µ 130 1300SF Alumina, 13% Titania 30/15µ 130SF 1310 Alumina, 40% Titania 325/15µ 131VF 1050 White Alumina 270/15µ 105NS 1050SF White Alumina 22/5µ 105SFP Applications: 1010 Subgroup - Good resistance to abrasive wear, sliding wear, friction, and oxidation up to about 1020°F, corrosion resistant. 13 Subgroup - Similar to 1010 products but lower hardness, less resistant to chemical attack, better grindability. 105 Subgroup - dense coatings, resistant to wear by fibers, highest dielectric  strength of all aluminum oxide coatings, erosion resistant at high temperatures from 1550-3000°F. CARBIDES SEACO Description Metco Stellite 4390 50% Rc 45 NiCrB (Self-fluxing), 50% 8812 WcCo 439NS 6153 310C 65% Rc50 NiCrB (Self-fluxing), 35% 8812 WcCo 31C-NS - 340F 50% Rc 60 NiCrB (Self-fluxing), 50% Wc 34F - 320C 20% NiCrB (Self-fluxing), 80% Wc 32C - 2400 88% Wc 12% Cobalt (Sintered) - JK 114 2412 (P) 88% Wc 12% Cobalt (Sintered) (Fine) - JK 112 7301 83% Wc 17% Cobalt (Sintered) 73F-NS-1 JK 117 7302 (P) 83% Wc 17% Cobalt (Sintered) (Fine) 73F-NS-2 JK 117 SP 2500 82% Wc 18% Cobalt (Sintered) - - 919C 91% Wc 9% Cobalt - JK 119 9010N 90% Wc 10% Nickel - 6189 3400 75% Chromium Carbide, 25% 80/20 Nickel-Chrome (Sintered) - - 3500 75% Chromium Carbide, 25% 80/20 Nickel-Chrome - JK 135 3600 80% Chromium Carbide, 20% 80-20 Nickel-Chrome - - SELF FLUXING PRODUCTS SEACO Description Metco Stellite SP22 Rc 16-23 Nickel - Silicon - Boron - Deloro 22 SP30 Rc 26-32 Nickel - Silicon - Boron - Deloro 30 SP35 Rc 32-38 Nickel - Chrome - Silicon - Boron - Deloro 35 SP44 Rc 35-40 Nickel - Chrome - Boron 12C Deloro 40 SP45 Rc 45-50 Nickel - Chrome - Boron - Deloro 50 SP46 (F) Rc 56-62 Nickel - Chrome - Boron (F-Fine) 15E & F Deloro 60 SP55 Rc 56-62 Nickel - Chrome - Boron - Copper - Moly 16C Deloro 75 180 Co, Ni: 27 Cr: 18 Mo: 6 Si: 3.5 B: 3 18C - 6F Modified Cobaly Alloy #6 (RCoCrA) Rc 38-46 - 6SF 12F Modified Cobaly Alloy #12 (RCoCrB) rC 48-52 - 12SF 157 Icreased Rc #6 - 157 BLENDS SEACO Description Metco Stellite 4500 95% Nickel 5% Aluminum (Clad) 450 JK 350 4430 94% 80-20 Nickel Chrome 6% Aluminum 443 NS - 5050 75% Moly, 25% Nickel - Chrome - Boron 505 - 4520 Iron Base, 38% Nickel, 10& Aluminum 452 - PURE METALS SEACO Description Metco 630 99% Molydenum 63NS 560 (F) 99% Nickel (Fine) 56C-NS 56F-NS 540 99% Aluminum 54NS 550 99% Copper 55NS ALLOYS SEACO Description Metco Stellite 316 316 Stainless Steel 1003 Delchrome 316 410 Hardenable, Wear Resistant Stainless Steel, 410 - - 1800 Iron Based, Corrosion Resistant below 1200°F, Wear Resistant 1008 - 1035 Iron Base, Hi Carbon, Moly bearing alloy, Low Coefficient of Friction 350NS - C-276 Nickel base Corrosion and Wear Resistant Alloy - "C" 625 Nickel base, Corrosion Resistant Alloy 1005 625 Supermet Co 26Cr 6Mo, Metal to Metalm Hi-temp, Corrosion - 21 T-800 Co 28MO 17Cr, Sliding Wear with Hi-Temp and.or Corrsion 3001 T-800 31 Cobalt base alloy, Erosion & Corrosion Resistant, Turbine Blades - 31 #6 Co 28 Cr 4W C1.0, Wear, Hi-temp, & Corrosion Resistant, Rc 42 - Stellite 6 #12 Co 28 Cr 8W 1.5C, Wear, Hi-temp, & Corrosion Resistant, Rc 48 - Stellite 12 #1 Co 30 Cr 12W 2.5C, Wear, Hi-temp, & Corrosion Resistant, Rc 54 - Stellite #1 4470 Ni 6AI 5Mo, Good Impact, Erosion, Medium Harndess 447NS - 4800 95Nickel 5Aluminum 480NS JK 350 520C Aluminum, 12% Silicon 52C-NS - 510 (F) Copper, 9.5% Aluminum, 1% Iron 51NS - MCrAIY's Various Products Available, Manufactured to Individual Specs. - - ABRADABLES SEACO Description Metco 3010 Ni 14Cr 8 Fe 5.5 Boron Nitride 3.5 Al 301C-NS 3080 Nickel, Graphite 25% - 3110 Aluminum, 7% Silicon, 26% Graphite 311NS 3130 Aluminum, 45.5% Graphite, 5% Silicon 313NS